Aiming an OTA Antenna With Data: Prometheus + Grafana on an HDHomeRun FLEX 4K

Fri, 07 Aug 2026 00:00:00 +0000

Aiming an over-the-air TV antenna is traditionally a two-person job with a lot of yelling: one person on the roof rotating the mast, one inside shouting “better… worse… BETTER… no, worse again.” The feedback loop is slow, the signal bar in the tuner’s web UI updates lazily, and you can never quite tell whether that last nudge helped.

I wanted a tight feedback loop: a live graph, updating every few seconds, of the exact signal metrics that matter — so I could rotate the antenna and watch a line move in real time. My tuner is an HDHomeRun FLEX 4K, and it turns out you can scrape per-tuner signal quality straight into Prometheus and chart it in Grafana. This post is how I built that, the one exporter that actually does the job, and the surprise ending where the data explained a “broken” channel that wasn’t broken at all.

Cord-Cutting on Linux Colorado

Aiming an OTA Antenna With Data: Prometheus + Grafana on an HDHomeRun FLEX 4K